Project Post-Mortem: An English Gown

When last I wrote, I mentioned the possibility of constructing some Italian-style sleeves to give an appropriate silhouette to my clothing for an upcoming event.  That did not happen.

No.  Instead, a mere three days before said event, I decided to construct an entirely new, entirely non-Italian dress.  (Glutton for punishment, perhaps?)

The Wednesday before the event, I could not decided what to wear.  The event would be outdoors, so the gown made for the court event would not work.  While I have a couple of linen kirtles, I’ve lost weight since they were made and they are a touch big.  But even if I wore one, without an overdress, I would appear half-dressed.  Obviously, I needed to make a new over-dress, right?

photo from The Tudor Tailor

Since I did not want an over-dress with large, turn-back sleeves, I chose to make an early Tudor-era gown as seen in The Queen’s Servants, by Caroline Johnson.  The gown featured trim sleeves, a fitted but not supported bodice with a long, full skirt very similar to a gothic fitted gown.  When reading over the pattern details, I saw that the fabric recommended was either wool or silk.  I opted for silk and decided to use a beautiful dupioni in gold that I purchased initially for another gown but did not use.  For trim, I had a few scraps left of black wool I could make bias strips from.  (I used this tutorial from Colette Patterns to make continuous bias tape.)

The book showed several variation in both neckline and back for the gown.  Because I am still losing weight, I chose a back-lacing style that does not meet in the back anyway.  For the neckline, I chose a classic, squared style.  I scaled up the pattern from the book, but decided to do few alterations.  The last gown fit pretty well with minor alterations and with an open back to the gown I figured it would be forgiving if it was a touch small.

completed English gown

The gown itself was uncomplicated to construct: shoulder seams, front, back, and side seams.  The sleeves would prove to be the most complicated, and they were.  

I know several sewers/sewists that loathe setting sleeves.  I’ve had my share of troubles with sleeves, too.  But the sleeves from my court gown went in so easily, that I assumed this gown would be the same.  It wasn’t, but it certainly was not anything too arduous.  With a small alteration to the armseye, and a fair amount of easing, I got both sleeves installed.  All that was left was to finish the details: lacing holes (I machined them*), hem, trim, which all came together quickly and easily.

The one thing that I should have done but did not was to try on the completed gown.  I repeated checked the fit of the gown during construction.  To do so meant slipping on a kirtle, lacing the kirtle, slipping on the gown, pinning/marking as needed.  So I skipped a final fitting.  Had I done a final fitting, I would have learned that my sleeve cap was a touch too small (less than an inch, probably).  Ah, well...

Overall, I was very pleased with the end result of the gown.  While the ill-fitting sleeves did result in a small blown seam at the event, I have plenty of silk left to redraft a larger sleeve.


*Yes, yes.  Hand-sewing the eyelets would produce a more accurate look.  But I've made no secret of my lack of patience to do them.

Lessons learned from this project:

• Making continuous bias tape is a bit tricky to learn, but once figured out making bias tape was a breeze.
• When I ran out of gridded pattern paper, I used my gridded cutting mat and semi-transparent butcher paper to draft my patterns.  It worked like a charm.  I think that I may like it better than using gridded paper.
• I machine basted my sleeves in prior to stitching (I have a new-to-me machine with an awesome basting stitch setting!), but I think that I should switch to hand-basting on trickier sleeves.
• Obviously, I need to plan for a full fitting once a project is completed so as to avoid small problems like what I experienced at the event.

Thoughts on the Next Big Project!

After successfully completing a new ensemble, I find myself inspired to do more.  For my next big project, I'm contemplating making a French-style round (untrained) gown circa 1530.  I'd like to pair it with a gable hood.  More accurately, a well-constructed gable hood, with all the pertinent layers, not just an ill-fitting one-piece affair.

Portrait of Lady Guildford
by Holbein (c1527)

While such a gown has certain telltale features such as turned back sleeves, and a deep square neckline, I do have a few options to figure out.  Foresleeves, for example.  Do I opt for a simple pleated foresleeve a la Lady Guildford?  Or do I chose a brocade like in the famous portrait of Queen Jane Seymore?  (In other versions of Queen Jane's portrait, she, too, wears the pleated sleeve.)

Jane Seymore,
Queen of England (c1536)

Regarding fabrics, I am leaning heavily towards using a damask to decorate the kirtle and a wool (instead of velvet) for the gown.  I could line the turn-back sleeves in velvet then.  (There is no way I'd want to line the sleeves in fur; too heavy, too hot for my climate.)

Perhaps the biggest potential problem with this gown, though, will be fit.  I have seen many such gowns that are not properly fitted through the back and shoulders resulting in the sleeve cap falling off towards the arm.  My knowledge of general garment sewing should help me here.  Thus far, I've been able to sew similar dresses with no major fitting issues.

Test-garment bodice,
note the shoulders

For the hood, it is pretty straight forward.  The most obvious differences seem to be the length of the linen front piece near the jawline.  In earlier portraits, the linen is longer.  The lappets, the fabric usually golden in color that is outer most on the sides also varies in length, but as it is usually pinned up, it does not change the overall look too much.

Most period images featuring a gable hood show the front only, but thankfully Holbein did a sketch that shows the back.

Holbein sketch with back of gable hood

I have about six months before our kingdom's next big court event, so I have some time to fret about the details.  In the meantime, I'm also considering a much smaller project for the next SCA event that I'll be attending.

My local barony's anniversary is this month and the theme is Italian.  I am trying to figure out if I could use one of my existing kirtles, but add some Italian-style sleeves.  I think that would add an appropriately Italian-looking silhouette to something I already own.  Thankfully, I have some very knowledgable friends who specialize in Italian Renaissance clothing.  I'll be asking them for advice!

Project Post-Mortem: Coronation Gown inspired by Early Tudor Clothing

Today was the 35th anniversary for the SCA Kingdom of Caid and the coronation of our newest King and Queen.  As such, I decided to mark the occasion by wearing a new gown.

Readers may recall that I started a new project back in December.  That project was in anticipation of this coronation.  But as the date drew nearer, I grew quite sick of hand-sewing eyelets on the kirtle.  So, the Thursday before last, I decided to chuck the whole project (for now), and I started over (mostly).

The chemise was already completed, so I just needed to make a new kirtle, a new over-gown, and a new bonnet.  I still wanted to base the new clothing on a couple of images I found in The Queen's Servants by Caroline Johnson.  (Johnson's book focuses on women's clothing from around 1500 to 1520, which is definitely not a "popular" period for costuming in Caid.  At least, not at the time of publication.)  Since I wanted to try something new and different, I sought out inspiration that was also different from I see frequently in Caid.  The image on page 15 of Jone Wyddowsoun from 1513 featured both the pointed bonnet style and peaked gown neckline that I would ultimate emulate.  The image from page 17 of Emme Pownder also showed the same bonnet style, but I used it to inspire my not-quite-so-enormous sleeves.

Kirtle complete!

For the kirtle, I used a beautiful russet wool that was gifted to me.  I opted for the "V" neckline to emulate the kirtle in the images listed above.  Plus, it seemed distinctly (early) English-Tudor as opposed to the very popular French-style gowns of the 1520s and onward.

As I am actively working towards a smaller figure, I chose to make the kirtle a bit too small.  Being side-laced, this only meant that for now it had a gap between the lacing edges that would be unseen under the gown.  This was a very quick part of the project in that I was able to draft, cut, and assemble the entire piece in one day.

Checking the combination

While I do have a gorgeous golden silk for an over-gown, I opted to make a quick trip to our local fabric district to see if I could find an inexpensive fabric from which to make the over-gown.  (When I make a new style of garment for the first time, I like to do so in a fabric that did not cost a fortune.  There is nothing more depressing than "ruining" beloved fabric for a gown that just did not quite work out.)

Bodice completed

My trip was a terrific success in that I found SEVERAL fabrics, all for less than $4.00/yard!  To best coordinate with the russet, I chose to use a damask in dark brown/black with a brass/golden pattern.  Had I been smart, I would've picked up a dark linen to use as lining.  I did not, so I had to use linen from my stash, which was white.

Adding the pleats

The bodice for the gown came together easily and quickly, to my surprise.  As I seldom work with patterned fabric, I was worried about matching up and centering the design.   Yet I managed to get it to match up in the front beautifully.  The back, though, proved even better.  I love how the pattern gives a slimming effect.

Side-view

Once the bodice was assembled, it was a matter of attaching and pleating the skirt.  I decided to put padded box pleats in the back as suggested by Johnson's book.  It did mean more hand-sewing than I usually like when under a deadline, but as construction had been quick up to this point, I chose to take the time to produce a more accurate silhouette.

Gown completed!

Once the padding was sewn in and the pleats attached to the bodice, it was just a matter of hemming the skirt and lining.  I managed to finish the gown by Wednesday, giving myself two full days to put finish up the details.

The bonnet was very easy to construct.  A little facing, but otherwise only two pieces of outer fabric (black velvet) and two pieces of lining.  Since I chose a bonnet with a uh... elfin profile, I did need to use about a yard of millinery wire to support the point.  I was able to hand-sew that in with plenty of time to spare.

Kebler-elf bonnet

I spent some time on Friday fidgeting with a few details.  Because of my lack of black lining fabric, I made sure to secure the hooks and eyes in the front as much as possible to avoid the edge rolling too much.  My efforts helped, but did not completely hide the white.  Of course, this fact would generate the one critical comment about the ensemble that I received today.










Lessons learned from this project:

• A material inventory would have benefitted me greatly and saved me from using white lining fabric.  
• While lining the skirt is beneficial in producing a beautiful inside to the gown, it is a pain to hem.  Perhaps I should try my hand at bag-lining?
• I still loathe hand-finishing eyelets, though I found a few tricks to make it easier (buttonhole twist!).  
• I also still hate piecing skirts.  I think that next time I will use a shaped front panel, but then use large rectangular panels for the sides and back, pleating them to give the right drape.
• I rely a LOT of that ol' stand-by, the whipstitch.  I should take the time to perfect catch-stitching between layers for a more "invisible" finish--even when most of my hand-sewing is inside the garment.

New Project: Part Two, Kirtle, postponed

I had a wonderful day yesterday.  I was out the door early to meet up with local moms followed by a terrific lunch with a dear friend.

I also recognized that I do not want to rush my latest project.  As such, yesterday I made the decision to postpone my new gown until after Twelfth Night.

I still have a lot to do.  The kirtle bodice and skirt were all cut out and partially assembled, for both the fashion fabric and the lining.  I still need to sew the skirt lining to the skirt; sew the bodice lining to the bodice; and then butt those pieces together and sew.  Hemming, finishing still left, of course.

And the over gown hasn't even been patterned yet.

After all the holiday bustle is over and the dust settles, I'll pull out the sewing machine again and get back to work.  Stay tuned!

New project at last!

After taking some time away from the sewing machine to relocate (too long, if you ask me), tonight I finally decided to dust off the brain meats and decide on a new project!

Holbein portrait of Jane Small (c1540)

At this last Great Western War, I took a class on kirtles and underclothes taught by the very knowledgable Lady Joan Silvertoppe.  That, plus the newly released book from the good folks at The Tudor Tailor, The Queen's Servents, have given me much inspiration.  As my persona is from the era, I've been eyeballing images of Englishwomen from around 1520 to 1540.  For YEARS I have wanted to create a version of the dress worn by Jane Pemberton Small, but I've let the blackwork intimidate me.     So to warm myself up for the task, I have decided to create an earlier silhouette.  The first step is deciding upon a smock/chemise!

A Young Englishwoman (c1520s)

The Queen's Servants lists a few neckline options; from squared to rounded, gathered to smooth.  As they're producing workable patterns to cover from the late 1400s up to about the 1520s, I decided to look to some portraiture (again) for inspiration.  I found two that I like: A Young Englishwoman by Hans Holbein, and Catherine of Aragon miniature by Lucas Hornebolte.

At the neck is seen either a partlet or the top of her smock.  It features a close round neck with a slit a button (or other) closure.  As I am the sort to need to slather sunscreen all over, the idea of covering my decollete is rather appealing!

Catherine of Aragon with a monkey (1525-6)

The miniature of Queen Catherine features a similar shape around the neck, only this time with some simple blackwork.  Though hers is most likely a sheer partlet and not her chemise, I like the style of embroidery and may try something like it on my smock.

Now that I have an idea in mind, it's time to get to work!  With the help of my husband, I've located the box with my linen stash and brought into the house.  Tomorrow I hope to bleach it, wash it, and at least prep it for cutting!  Wish me luck!

Great Western War 2012

Canvas pavilions, four poster beds, candle-lit evenings under a starry sky....  Yeah, we don't really "rough it."

Declan helps

Last week was our family's annual camping trip to Great Western War.*  As we had Declan to contend with leading up to the event, I was unable to get much done in the way of sewing prior to the war.  I usually like to make at least one new outfit for myself and, if possible, for the spouse.  Alas, not this time.

Our modest home-away-from-home

Despite the lack of new clothing, I still had a good time.  Declan was certainly a handful, but he had such a grand time playing with our friends' children, and generally making a mess of himself.

Playtime!

We arrived on Wednesday afternoon, the same day as most of the other campers in our camping group. The afternoon was spent putting together most of our shared camp.  Raising pavilions, unpacking, setting up our kitchen.  By the time we were finishing up, night was falling so we escaped to a local (well, only a half-hour away) restaurant for dinner.

The following day was rather mellow.  I spent much of it chasing after Declan as he was still getting used to the new surroundings.  Our camping spot bordered the road, sand, and the lake--a LOT for a toddler to avoid.

Fascinating dirt

On Friday, our camp neighbors held a Pas d'Arms tournament.  In years past, my Fin has participated, but he decided to abstain this year in an effort to help keep Declan from trouble.  As much as I missed seeing him fight for the amusement of the gallery, I was very glad to have his help.  Friday is also when my daughter arrived in camp.  While it was only a day and a half that we were apart, it was great to see her again.

Procession

Fin's main goal for the war was to fight again for the Guardians, our Barony's fighting unit.  On Saturday, the Barony of Gyldenholt makes a great show of support to all its fighters, heavy and rapier, by processing onto the field.  Declan rode in a wagon to march with Dad, but lost all patience once we arrived to the fighting field.  Fair enough, I rarely spend much time on the field myself.

Couple of clowns

By Sunday it was time to pack up camp and return to the mundane world.  I did have time take a class on Tudor-era underclothing that morning.  (Thank heavens for the class being offered twice!  I missed the first offering on Saturday as I had the baby.)  The class was so inspiring!  I left with my head absolutely spinning from sewing ideas.

I returned home late Sunday afternoon/early evening exhausted, but happy.  Another great war come and gone...



*The SCA has several multi-day camping events called wars.  One of our local wars is Great Western.